ATEN PN5212 Bedienungsanleitung PDF herunterladen (Seite 75)

Chapter 7. Device Management

Network

The Network page is used to specify the Power Over the NET™ device’s

network environment. The main section is divided into 5 panels. Select the

device you want to configure in the Sidebar, then fill in the information in the

panels according to the information given in the sections that follow.

When you have finished making all of your configuration settings, click Save

(at the bottom of the page).

Service Ports

As a security measure, if a firewall is being used, the Administrator can specify

the port numbers that the firewall will allow. If a port other than the default is

used, users must specify the port number as part of the IP address when they

Over the NET™ device will not be found.

An explanation of the fields is given in the table below:

Note: 1. Valid entries for all of the Service Ports are from 1–65535.

2. The service ports cannot have the same value. You must set a

different value for each one.

3. If there is no firewall (on an Intranet, for example), it doesn’t matter

what these numbers are set to, since they have no effect.

Field Explanation

HTTP The port number for a browser login. The default is 80.

HTTPS The port number for a secure browser login. The default is 443.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 152 153

Keine Kommentare

ATEN PN5212 Bedienungsanleitung Seite 75