ATEN CS-1008 Bedienungsanleitung PDF herunterladen (Seite 47)

5. Hotkey Operation

Auto Scan Mode

Auto Scan automatically switches among all the active KVM ports that are

accessible to the currently logged in user at regular intervals, allowing

automatic monitoring of computer activity. (See Scan/Skip Mode of the OSD

F3: SET function, page 26 for information regarding accessible ports.)

Setting the Scan Interval

The amount of time Auto Scan dwells on each port is set with the Scan

Duration setting of the OSD F3 SET function (see page 26). You can change

the scan interval before activating hotkey auto scanning, if you wish, with the

following hotkey combination:

1. Invoke Hotkey mode (see page 35).

2. Key in [T] [n]

Where [T] is the letter T, and [n] is a number from 1–255 that represents

the number of seconds the system dwells on a port before going on to the

next.

The letter T and the numbers display on the command line as you key

them in. If you make a mistake, use [Backspace] to erase the wrong

number.

3. Press [Enter]

After you press [Enter], you automatically exit Hotkey mode, and are

ready to invoke auto scanning.

Invoking Auto Scan

To start auto scanning, key in the following hotkey combination:

1. Invoke Hotkey mode (see page 35).

2. Press [A].

When you press A, you automatically exit Hotkey mode; enter Auto Scan

mode; and auto scanning begins.

While Auto Scan mode is in effect, ordinary keyboard and mouse functions are

suspended - only Auto Scan mode compliant keystrokes and mouse clicks can

be input. You must exit Auto Scan mode (see p. 38) in order to regain normal

control of the console.

cl1008-1016.book Page 37 Thursday, January 20, 2011 5:24 PM

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 72 73

Keine Kommentare

ATEN CS-1008 Bedienungsanleitung Seite 47