ATEN CS1794 Bedienungsanleitung PDF herunterladen (Seite 31)

Chapter 4. Keyboard Port Operation

USB Reset

If the USB loses focus and needs to be reset, do the following:

1. Invoke HSM (see see page 20).

2. Press and release [F5]

Hotkey Beeper Control

The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the

following:

1. Invoke HSM (see see page 20

2. Press and release [B].

The Beeper toggles On or Off.

Disable Port Switching Keys

To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),

do the

following:

1. Invoke HSM (see see page 20).

2. Press [X] [Enter].

Note: This procedure is a toggle. To enable the Port Switching keys repeat

steps 1 and 2.

Firmware Upgrade Mode

To set the CS1792 / CS1794 to Firmware Upgrade Mode, do the following:

1. Invoke HSM (see page 20).

2. Key in: upgrade

3. Press [Enter].

The front panel LEDs flash to indicate Firmware Upgrade Mode is in

effect.

Note: To exit Firmware Upgrade Mode, you must power off the switch.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 46 47

Keine Kommentare

ATEN CS1794 Bedienungsanleitung Seite 31